Men's Grey Polyester Bomber hooded Jacket With black rib and mesh
lining TW83339
SPECIFICATIONS :
| NAME | POSITION | SIZE | COLOR | QTY |
| NYLON ZIP | PLACKET & CHEST & POCKETS | #5 | DTM | 4 |
| EYELET | HOOD | 9MM | GUNMETAL | 4 |
| TOGGLE | HOOD | | BLACK | 2 |
| DRAWCORD | HOOD | 8MM | BLACK | 1 |
| MAIN LABLE | CB | 50X88 | | 1 |
| SIZE LABLE | CB | | | 1 |
| CARE LABLE | 10CM ABOVE HEM | | | 1 |
| HANGTAG | LSW CUFF | | | 1 |
MEASUREMENTS:
| MEASUREMENTS | Tolerances | X-Small | Small | Medium | Large | X-Large | XX-Larg |
| Hood Height at Opening | 10/5 | 36 | 36 | 36.5 | 37 | 37.5 | 38 |
| Hood Width at Widest | 19/5 | 23.5 | 24 | 25 | 26 | 27 | 28 |
| Collar Leading Edge | 0/0 | 7 | 7 | 7 | 7 | 7 | 7 |
| Across Back Neck (HSP to HSP) | 5/5 | 19 | 19.4 | 20.2 | 21 | 21.8 | 22.6 |
| Neck Drop (seam to seam) | 5/5 | 7.8 | 8.2 | 8.6 | 9 | 9.4 | 9.8 |
| Across Front Mid-Armhole or Yoke | 10/10 | 36.5 | 37.6 | 39.8 | 42 | 44.6 | 47.2 |
| Across Back Mid-Armhole or Yoke | 10/10 | 38.5 | 39.6 | 41.8 | 44 | 46.6 | 49.2 |
| Half Chest at Underarm | 10/10 | 46 | 48 | 52 | 56 | 62 | 68 |
| Shoulder Seam ex Neck Trim | 5/5 | 12 | 12.4 | 13.2 | 14 | 14.8 | 15.6 |
| Half Bicep at Underarm Pt | 5/5 | 18.5 | 19 | 20 | 21 | 22.5 | 24 |
| Half Hem Width - Straight Across | 10/10 | 38 | 40 | 44 | 48 | 54 | 60 |
| Half Armhole (Diagonal) | 5/5 | 22 | 22.5 | 23.5 | 24.5 | 26 | 27.5 |
| Half Cuff Width | 5/5 | 8.5 | 9 | 9.5 | 10 | 11 | 12 |
| Cuff Depth | 0/0 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 |
| Front Length (from HSP) | 10/15 | 67 | 68 | 70 | 72 | 74 | 76 |
| C/Back Length from Neck Seam | 10/15 | 65 | 66 | 68 | 70 | 72 | 74 |
| Welt Depth | 10/15 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 |
| Sleeve Length (including Cuff) | 10/10 | 66.5 | 67 | 67.5 | 68 | 68.5 | 69 |
| Print position from HSP | 10/10 | 15.5 | 16 | 17 | 18 | 19.5 | 21 |
Styling - Front:
HOOD:
- 3 Panel hood as per original.
- Panel seams of hood to be finished with foot stitch.
- Hood opening to be finished with tunnel stitch
- At drawcord opening to have 2x black coated eyelets. 9mm
diameter.
- Chunky round drawcord; 8mm diameter, black, slightly finer weave
than drawcord on sample.
- To have toggle on drawcord between the two eyelets as per sample
- Drawcord ending to come out at bottom of tunnel as per sample
- Drawcord endings to be rubber sealed; colour of seal = black.
Drawcords must be knotted before sealing
- Front neck to be raised as per original.
- Finish neck seam with 5mm edge stitch.
SHOULDER SEAM:
Finish with edge stitch
CF ZIP:
-Change to size 5 reversed coated nylon coil zip
-To have branded black metal puller with black plastic tip. Tip to
have raised swish
CHEST ZIP:
At LHSW
-Size 5 reverse nylon coil zip
-To have branded black metal puller with black plastic tip. Tip to
have raised swish
-Zip to be concealed with a welt, finish welt with an edge stitch
-Functional pocket with poly lining
BOTTOM ZIPS:
-Slanted reverse nylon coil size 5 zips with rubber coating
-To have branded black black metal puller with black plastic tip.
Tip to have raised swish
-Zips to have self fabric welt above zip, 2cm length
-Finish around zips with edge stitch
-Functional pocket with poly lining
PRINT AT RHSW:
- Chest print on LHSW chest
- Print to be 25mm in height, width adjusted propotionately
SIDE SEAM:
Finish with twin needle as per sample
HEM:
Self fabric inset at CF, finish with foot stitch
To have 1x1rib hem with good recovery, 5.5cm wide
SLEEVE:
-Standard set in sleeve
- Finish at armhole with foot stitch
- Cuff to be finished as original, 1x1 rib with good recovery. Cuff
width 5.5cm
-Finish above cuff with foot stitch
BADGE ON SLEEVE:
Rubber badge
Black base, white wording
Back:
HOOD:
- 3 Panel hood as per sample.
- Panel seams of hood to be finished with foot stitch.
- Hood opening to be finished with tunnel stitch
- Finish neck seam with 5mm edge stitch.
BODY:
Horizontal cutline across back as per sample
SLEEVES:
As per front
HEM:
As per front
Inside:
HOOD LINING:
Mesh as original, black
BODY LINING:
Mesh as original, black
SLEEVE LINING:
To be poly as original, black
LABEL AT CB:
Black flat label with white wording, design attached
To be laid onto self fabric patch creating a 1cm border around
label
TAPE LOOP:
As original, colour to be black
STORM FLAP:
As original, 2cm wide
INTERNAL POCKET:
Vetical welt pocket with popper closure as per sample
Finish with edge stitch
Specification
1, High fashion,good quality, reasonable price,comfortble feeling
and cost-effective.
2, Material : varous material,according to your requirements.
3, Color : according to your requirements.
4, Size : XS,S,M,L,XL,XXL,according to your requirements.
5, MOQ : 1000 pieces per style,Please give your order quantity,mix
order also available.
6, Price : FOB Price depends on your order quantity.
