Menswear mandarin collar metal zip through tan mock suede biker
jacket TW69110
Description
Shell fabric
| 100%polyester 100%viscose base |
Lining
| 210T navy lining |
Trims list
Trim
| Position | Quantity | Size | Color |
nylon zip
| CF+side pocket | 3 | #5 | gunmetal |
Branded puller
| CF+side pocket | 3 | | gunmetal |
Branded popper
| collar+cuff | 3 | 16mm | gunmetal |
Styling Details
Front:
Collar:
3cm wide stand up mandarin collar with stud fastening as sample.
To have foot stitching at top edge and edge stitching at neck seam.
Body:
To have zip through center front with flat piping on either side
covering zip tape, leaving zip teeth exposed.
To have edge stitching on side of piped edge as sample.
Side zip pockets to be slanted as per sample with flat piping
covering zip tape, leaving zip teeth exposed.
Side pkts - # 3 zips as per sample in gunmetal finish.
Zip length to be 17.5cm as per sample with edge stitching around
All zips to have DH branded zip pullers.
CF zip #5 as per sample in gunmetal finish.
Shoulder and armhole seams to be footstitched.
Sleeve and side seams to have edge stitch on either side of seam.
Hem to be straight as sample with a wider hem allowance of 2.5cm.
Sleeves:
To have long sleeves with separate cuffs as sample.
Cuff width to be 5cm with edge stitch at top seam and foot stitch
at hem
To have branded popper on the cuff opening.
Back:
To have a horizontal back yoke 14cm below collar seam., foot
stitched.
To have a 3.2cm wide box pleat at center back seam, below yoke,
foot stitched on either side as sample.
Sleeves to be two piece with seam at back aligned wth back yoke
seam at armhole seam.
Sleeve to have an 8cm long gauntlet above cuff.
Cuff to have a DH branded stud fastening inplace of buttons.
Inside:
To be fully lined with navy poly twill lining.
Colour as per sample
To have a self fabric center back loop
To have a self fabric portrait patch 2.5cm below collar seam.
Please add the navy/ white /red ottoman tape above and below
portrait patch as per image attached.
The tape extending out at the bottom must form a 1cm loop doubled
back under portrait patch.
Please include Daniel Hechter branded navy piping between lining
and facing
Mearsurement
| MEASUREMENTS | Tolerances | XXS | X-Small | Small | Medium | Large | X-Large | XX-Larg |
| Collar Depth @ Centreback Neck | 0/0 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| Collar Leading Edge | 0/0 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| Collar measurement at top edge | 5/5 | 39 | 40 | 42 | 44 | 46 | 48 | 50 |
| Across Back Neck (HSP to HSP) | 5/5 | 15.9 | 16.4 | 17.2 | 18 | 18.8 | 19.6 | 20.4 |
| Neck Drop (seam to seam) | 5/5 | 8.2 | 8.2 | 8.6 | 9 | 9.4 | 9.8 | 10.2 |
| Across Front Mid-Armhole or Yoke | 5/5 | 36.5 | 37.6 | 39.8 | 42 | 44.6 | 47.2 | 49.8 |
| Across Back Mid-Armhole or Yoke | 5/5 | 38.5 | 39.6 | 41.8 | 44 | 46.6 | 49.2 | 51.8 |
| Half Chest at Underarm | 10/10 | 46 | 48 | 52 | 56 | 61 | 66 | 71 |
| Half waist 53cm down | 10/10 | 43 | 45 | 49 | 53 | 58 | 63 | 68 |
| Half Hem Width - Straight Across | 10/10 | 45 | 47 | 51 | 55 | 60 | 65 | 70 |
| Shoulder Seam ex Neck Trim | 5/5 | 13 | 13.4 | 14.2 | 15 | 15.8 | 16.6 | 17.4 |
| Sleeve Length (including Cuff) | 10/10 | 66 | 66.5 | 67.5 | 68.5 | 69.5 | 70.5 | 71.5 |
| Half Armhole (Diagonal) | 5/5 | 22.5 | 23 | 24 | 25 | 26.5 | 28 | 29.5 |
| Half Bicep at Underarm Pt | 5/5 | 18.5 | 19 | 20 | 21 | 22.5 | 24 | 25.5 |
| Half Cuff Width | 5/5 | 12 | 12 | 12.5 | 13.5 | 14.5 | 15.5 | 16.5 |
| Cuff Depth | 0/0 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| Front Length (from HSP) | 10/10 | 64 | 66 | 68 | 70 | 72 | 74 | 76 |
| C/Back Length from Neck Seam | 10/10 | 62 | 64 | 66 | 68 | 70 | 72 | 74 |
Specification
1, High fashion,good quality, reasonable price,comfortble feeling
and cost-effective.
2, Material : varous material,according to your requirements.
3, Color : according to your requirements.
4, Size : XS,S,M,L,XL,XXL,according to your requirements.
5, MOQ : 1000 pieces per style,Please give your order quantity,mix
order also available.
6, Price : FOB Price depends on your order quantity.
